Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

How to uncouple model railroad train cars on tracks

How to use magnets and uncoupling tools on model railroad freight cars and keep them on the track
Backtobasicsuncoupling1Jul2003
Fig. 1 Uncoupling over ramp. The couplers will begin to separate whenever the slack is bunched over a magnetic ramp.
Backtobasicsuncoupling2Jul2003
Fig. 2 Delayed action. To use delayed action, push the cars back together over the ramp. The uncoupled model train car can then be pushed to the desired location along the track.
BacktobasicsUncoupling3Jul2003
Fig. 3 Permanent magnets. Permanent magnets in HO scaleinclude (clockwise from top) the Kadee nos. 308, 312, and 321 ramps. Other manufacturers offer similar ramps.
BacktobasicsUncoupling4Jul2003
Fig. 4 Between the ties. Gaps must be cut in the ties to install small magnets such as the Kadee 312. Use a chisel point hobby knife blade to cut the ties.
BacktobasicsUncoupling5
Fig. 5 Electromagnet. Electromagnets, such as the HO scale Kadee no. 307, eliminate accidental uncoupling, but they require mounting the coil and other hardware below track level.
BacktoBasicsUncoupling6Jul2003
Fig. 6 Mechanical tool. Accurail's Accumate Switchman works by inserting the tip between the coupler knuckles and twisting the Switchman tool gently.
BacktoBasicsUncoupling7Jul2003
Fig. 7 Magnetic tool. The Rix uncoupling tool uses a pair of magnets to pull the couplers uncoupling pins apart.
Automatic knuckle couplers look great, and they make coupling cars extremely easy – you simply push them together. However, when it comes to uncoupling, far too many of us rely on the hand from the sky method (also known as the 0-5-0 switcher), reaching in to lift up the end of the car. This isn’t ideal in terms of realism, and you risk damaging rolling stock and surrounding scenery. In addition, this kind of uncoupling leads to derailments since wheels often don’t go back on the rails when you set the car back in place.

Fortunately, there are many uncoupling tools out there that make it easy to separate cars without manhandling your rolling stock

Magnet magic
Uncoupling magnets work by pulling aside steel pins under the couplers. To use, spot the couplers directly above the magnet. The Couplers must be slack, so you might have to back up slightly to ease the tension.

The couplers will begin to separate as Fig 1 shows. If you want t oleave the car at that location, simply pull the rest of the train away and the car will remain at that spot.

Magnetic couplers can also be used with what is known as delayed action, which allows a car or cars to be positioned at any location beyond a magnet. To do this, position the couplers above the magnet, as in fig. 1. Then, instead of pulling completely away, pull away just enough to allow the coupler to separate wide as fig 2 shows.

Ease the cars back together (the magnet will keep them from coupling), then continue pushing to the spot where you want to leave the car. When you top and pull away, the couplers will return to their normal positions without recoupling.

Magnetic uncouplers are either permanent magnets, which are always “on,” or electromagnetic, which are activated by applying electricity to the magnet’s coil.

Permanent magnets (fig. 3) work very well. As long as the slack is stretched (such as when a train is being pulled) cars will pass over the ramp without uncoupling. However, if the slack gets bunched, as cars are being pushed or when a train slows down, the magnet can accidentially uncouple cars. For this reason, it’s best to use permanent magnets on sidings and spur tracks.

Large magnets, like the HO scale Kadee no. 308 in fig. 3, are powerful enough to be located under the ties. They’re the ideal choice when first building a layout, as they can be installed before laying track. They can then be completely hidden by ballast.

Figure 3 shows two Kadee between-the-rails magnets. The larger no.321 uncoupler allows delayed uncoupling; the narrower no. 312 coupler can uncouple cars only at the magnet. In N scale, Micro-Trains offers the no. 1310 between the rails uncoupler, the no. 1311 uncoupler (which comes mounted to a piece of Atlas code 83 track) and the under track no. 308 uncoupler.

Kadee’s no. 321 can sometimes be placed atop the ties with code 100 track, but uncoupling pins won’t clear the magnet on code 83 and smaller track. For these, the ties between the rails must be cut away and the magnet glued in the gap, as fig 4 shows. The magnet can then be hidden by ballast.

Electromagnets (fig. 5) are ideal for main lines, where they can be activated only when needed. These uncouplers are more work to install, as a holemust be made in the roadbed and subroadbed, to clear the assembly. You’ll also need a power supply controlled by a momentary contact ush button which can be located on a control panel or on the fascia at the edge of the model train layout.

Hand tools
Hand uncoupling devices have the advantage of being able to uncouple cars at any location. A disadvantage is that you must reach over part of the model railroad to uncouple cars, so there’s the chance of bumping scenery. Hand tools are a good choice when the track is within easy reach of the front of the layout. A simple wooden skewer works fine, but there are also specialized tools on the market.

The Accumate Switchman (no. 1001) from Accurail (fig. 6) is designed for the Accumate coupler, but with a bit of practice will work well for other knuckle couplers. To use the Switchman, slip the tip between the coupler knuckles and twist gently.

The Rix no. 14 uncoupling tool (fig. 7) uses a pair of small magnets on a bracket to pull the uncoupling pins apart. Place it between cars, then move the cars apart.

Regardless of the uncouplers you use, it’s vital that your couplers are installed properly – at the correct height per National Model Railroad Association Standards and moving smoothly or they won’t work well.
0
Some modelers use hand tools for all uncoupling; others use hand tools on main lines and magnetic ramps on spurs, sidings, and yards. Choose the method and tool that works best for each location, and you’’ll find yourself using the 0-5-0 switcher less and less.

Join the discussion

Read and share your comments on this article
Comment on this article
Want to leave a comment?
Only registered members of ModelRailroader.com are allowed to comment on this article. Registration is FREE and only takes a couple minutes.

Login or Register now.
0 comments
FREE DOWNLOAD

FREE DOWNLOAD

How to personalize your layout.

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!
By signing up you may also receive occasional reader surveys and special offers from Model Railroader magazine. Please view our privacy policy