Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Turning Big Boys in 2 x 5 feet

This HO scale locomotive terminal lifts to the ceiling to clear a doorway
HOscaleeaglecreeknorthernbigboy1
A Big Boy 4-8-8-4 gets turned on the 130-foot turntable and Union Pacific diesels stand ready in the roundhouse on Flemming Ørneholm’s Eaglecreek & Northern. The 2 x 5-foot engine terminal scene is part of a new extension to the layout.
Pelle K. Søeborg
Flemming Ørneholm’s HO scale Eaglecreek & Northern, which was featured in the February 2012 Model Railroader, is a testament to his ingenious use of space. In less than 7 x 12 feet, Flemming’s HO scale layout captures the sprawling vistas of the west along the Union Pacific. With massive UP 4-8-8-4 Big Boys regularly hauling freight along the main, the layout feels larger than it is. Over the past year, Flemming made the layout even better with an engine terminal that includes a roundhouse and a Digital Command Control (DCC)-equipped HO scale 130-foot turntable.

The inspiration for the extension to the layout came from an engine terminal module that Flemming saw during the National Model Railroad Association British Region convention in 2010. Thinking that he’d run out of layout space, Flemming originally planned his own engine terminal model as a stand-alone diorama. However, he always wanted an easier way to turn locomotives on his layout, so he figured out a way to incorporate the scene into the Eaglecreek & Northern.

HOscaleeaglecreeknorthernbigboy3
A removable corner section connects the engine terminal to the staging tracks. This section and the buildings must be removed before hoisting up the terminal.
Pelle K. Søeborg
HOscaleeaglecreeknorthernbigboy4
After removing the 2-piece backdrop, Flemming hoists the module and its lighting fixtures up to the ceiling via a pulley system. The 10-foot-long staging track shelf with a clear acetate dust cover is also stored at the ceiling.
Pelle K. Søeborg
Space-saving design
Most of the Eaglecreek & Northern is built in a 6'-8" x 12'-0" room. The main line passes through a hole in the wall to a staging yard built in an adjoining bedroom. Flemming built this scenicked yard on top of a 1'-10" x 10'-0" cabinet. His new engine terminal scene connects to the end of the yard.

As you can see in the overhead photo below, the new layout extension consists of three parts: the engine terminal diorama, a narrow shelf with two10-foot long staging tracks, and a city corner section that connects the staging tracks to the main line. There’s also a removable foreground section that’s used only for adding depth to layout photos.

The biggest challenge in building the layout extension was that it had to span the doorway between rooms. Flemming solved the problem by building the engine terminal scene and the staging track shelf on a pulley system. Between operating sessions, Flemming hoists these sections to the ceiling. The corner city section lifts out and is stored under the main layout.

Flemming made the sections as lightweight as possible. The engine terminal and corner section are made of foam insulation board. To give the sections a finished appearance and to protect the soft foam, he covered the edges with a fascia made of white sheet styrene. The staging shelf is a single length of aluminum channel.

Window shades mounted on the ceiling protect the scene from dust. The staging tracks have clear acetate for dust protection. These sheets are attached to one side of the aluminum channel so they can easily be flipped up when the staging tracks are needed for an operating session. A long venetian blind conceals the city yard between sessions.

HOscaleeaglecreeknorthernbigboy5
Once the engine terminal is secured above, the doorway is unobstructed. Window shades conceal the terminal module and protect the models from dust. Flemming uses longer venetian blinds for the yard atop the cabinet.
By Pelle K. Søeborg
HOscaleeaglecreeknorthernbigboy6
Black window shades above the backdrop keep the viewer focused on the layout scene, instead of the room’s doorway. Shown here with the window shade valance raised up, the “barn doors” hanging from the fluorescent light tube help conceal the light source from the viewer.
Backdrop and lighting
The backdrop is made of hardboard painted with sky blue acrylic paint. Because the scene is in a corner and needs to be removable, Flemming made the backdrop in two pieces. He coved the corner joint between the two backdrop sections to avoid the harsh shadows that would be caused by a right-angle corner.

Flemming made the city scene on the backdrop using photos of his building models that he manipulated with photo-editing software. He then printed the backdrop scene on photocopier paper and attached it to the backdrop with spray adhesive.

The same window shades that conceal the scene when it’s stored act as lighting valances when the scene is in use. Above the backdrop, Flemming also uses black shades to conceal the upper portions of the room’s doorway and interior wall. This keeps the viewer’s attention focused on the scene.

Two fluorescent light tubes are concealed behind the window shade valance provide layout lighting. To help conceal the light source from the viewer, Flemming added a few “barn doors” to one of the light tubes. Typically used in theatrical lighting, barn doors are usually movable flaps mounted around the lens of a spotlight to direct or diffuse the beam. Flemming’s barn doors are sheets of styrene attached to the light tube. The sheets are black on one side to match the shade above the backdrop and white on the other to match the inside of the lighting valance.

HOscaleeaglecreeknothernbigboy8
lemming scenicked a sheet of Gatorfoam to use as a removable photo foreground, as in the photo above. This piece fits on top of the layout fascia.
HOscaleeaglecreeknorthernbigboy9
This photo shows the scene with the foreground piece removed.

Better photos with removeable foreground

Narrow benchwork is useful for fitting a layout into a small space, but it makes taking realistic layout photos more difficult. If the track is close to the edge of the benchwork, it’s hard to get a photo that doesn’t have part of the fascia in the shot. Flemming solved this problem on his engine terminal module by building a removable photo foreground.

The foregound consists of a sheet of lightweight Gatorfoam that rests on top of the fascia edge. [Gatorfoam is commonly used as a backing material for photos. It’s available in several thickness from art supply stores. – Ed.] Flemming scenicked the Gatorfoam with ground cover that matches the rest of the layout, and also added a road and maintenance shed. When operating the layout, he simply lifts off the foreground so it’s out of the way.

HOscaleeaglecreeknorthernbigboy10
The shed and dirt road are part of a removable foreground that Flemming uses to add depth to layout photos. The Shay steam locomotive is on the short track of the Heritage Museum that’s part of the city corner section.
HOscaleeaglecreeknorthernbigboy7
Flemming designed the turntable to be removable for maintenance. After removing the plastic cover plates in the pit and four screws (left), he can lift out the turntable and mechanism (right). The model can be separated from the mechanism by removing a single hex bolt in the center of the bridge.
Servicing steam and diesel power
As with the rest of the Eaglecreek & Northern, the engine terminal is set in 1955 during the steam-to-diesel transition era. Therefore, Flemming made sure to include a sanding tower and separate servicing track for diesel-electric locomotives in addition to modeling equipment necessary for coaling, watering, and sanding steam engines.

The sand house and tower, cinder conveyor and ash pit, coaling tower, and water tower are Walthers Cornerstone Series kits. The roundhouse is also a Walthers kit that Flemming modified to fit the available space. The two water columns are from Tichy Train Group.

Although Walthers now makes an operating HO scale 130-foot turntable with DCC, this model wasn’t available when Flemming began the terminal project. Instead, he scratchbuilt his turntable and its mechanism. Highlights of this model are shown in “Flemming’s scratchbuilt turntable” above.

The tall buildings on the corner connector section of the scene are made from Design Preservation Models modular parts. This section also features the Heritage Museum, from which antique logging equipment regularly makes excursion runs.

The engine terminal scene with its working turntable has improved the layout’s operating potential. The twin staging tracks are also a great enhancement. Flemming can now use his city yard tracks for actual switching instead of staging and storage.

With his layout extension, Flemming once again proves that building a great model railroad doesn’t require a large train room. The most important thing is how creatively a model railroader uses the space available to him

EaglecreekNorthern
Click on the image to download the track plan.
The track plan at a glance
Name:
Eaglecreek & Northern Ry. engine terminal module
Size: 2 x 5 feet with 41⁄2" x 10'-0" staging track shelf
Prototype: Union Pacific
Locale: western United States
Era: 1955
Style: module
Minimum radius: 28"
Benchwork: foam insulation board
Height: 57 1⁄2"
Roadbed: foam rubber and auto body sound insulation
Track: Peco code 83 flextrack
Backdrop: painted hardboard with printed photo
Control: Lenz DCC

Join the discussion

Read and share your comments on this article
Comment on this article
Want to leave a comment?
Only registered members of ModelRailroader.com are allowed to comment on this article. Registration is FREE and only takes a couple minutes.

Login or Register now.
0 comments
FREE DOWNLOAD

FREE DOWNLOAD

13 yard ideas for design and operation.

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!
By signing up you may also receive occasional reader surveys and special offers from Model Railroader magazine. Please view our privacy policy